Amber LED Traffic Light Traffic lights which may also be known as traffic signal, stoplights, traffic lamps, signal lights etc…. are signaling devices positioned at road intersections, pedestrian crossings and other locations to control movements of traff..
IQMS provide testing in NDT (Ultrasonic testing , Radiography, Magnetic Particle Testing, Liquid Penetrant Testing, Thickness Measurement) and Mechanical, Chemical, Civil, Textile & Garments from approved lab. NDT provides an excellent balance between Quality Control and cost effectiven..
As per the variegated requirements of our clients, we are offering a broad collection of Ageing Test Tray. The offered tray is highly praised by the clients owing to its different quality features like durability and corrosion resistance. Our provided tray is manufactured with stainless steel mesh f..
Specification: Loads (kgf): 500 to 3000 in steps of 250 Initial load (kgf): 250 Max. test height x throat (mm): 380 x 200 Max. Depth of elevating screw below base (mm) approx:180 Machine height (mm) approx: 1150 Size of base (mm) approx: 400 x 740 Net weight (kg) approx: 325 Drive Motor (hp)..
Compression Testing Machine is used to determine the compressive strength of a concrete cube, which has usually been made from fresh concrete cast in a standard test mould. The value of compressive strength can then be used to assess whether the batch that the concrete cube represents meets the..
Inner chamber made of S.S., outer body mild steel duly powder coated. Suitable to accommodate 6 cube moulds of 150mm. The unit is provided with digital temperature controller cum indicator and water circulation pump. Temperature range 5° above ambient to 100°C.
Universal Testing Machine have a wide range of applications. Anumber of materials, metals in different form and shapes can be tested for variety of tests like Tension, Compression, Transverse, Bend, Shear, Brine Hardness etc. Special attachments are also available for testing of Flat Belts, Ch..
Torsion Testing Machine is designed for conducting Torsion and twist tests on various metal wires, tubes, sheet materials. Torque measurement is by Pendulam Dynameter System. Torque ranges can be adjusted. Torque can be applied to specimen by geared motor through gearbox. Autographic recorder c..
US: 654, IS: 1257 & IS : 1706 This unit for finding flexural strength of clay roofing tiles and cement concrete flooring tiles. Flexural load is applied on the tiles using lead shot. Machine consists of a stand on which two 40mm dia bearing rollers or 12mm dia rollers are placed at ..
IS : 1237, IS : 1706 This is used for determination of resistance to wear for cement concrete flooring tiles. Tiles specimen of size 7.06cm x 7.06cm is pressed tace wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding path and after specifi..
IS: 1828/BS: 1610 These tensile testing machines are manufactured by using premium quality material and following industry norms, under the guidance of experienced professionals. Stringently tested before the final dispatch, these machines are suitable for testing rubber, Teflon, cardboard, latex..
One Loading unit, hand operated, 5 tonnes capacity One Proving Ring 250 kgs capacity. One Dial Indicator 0.01 mm sensitivity. One Mould 100mm x 127.3mm high (1000cm volume) with collar and base plate – Gun Metal. One perforated swell plate 100mm dia x 16mm thick. Two Porous Stones 100mm dia x ..
Static Cone Penetrometer 3000 Kg Capacity - Hand Operated. The loading is done hydraulically. Two pressure gauges 15cm diameter one of low capacity 0-60k9/sq.cm.in 0.5k9/cm. sq. divisions and other 0 -160k9/cm sq. are provided to indicate the penetration resistance. Isolation valve is provided to au..
IS:7320, BS1881: Part 102, BS 5075, ASTM C143 It is used for the determination of the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38mm. Specifications: The Apparatus consists of one Slump Cone with handles and foot pieces. ..
IS 2720 PART XIV ASTM D4253 | ASTM D4254 The equipment comprises a vibratory table 75mm x 75mm motorized 230 Volts, single phase A.C. cylindrical mould 3000 cm3 and 15000 cm3, guide sleeve with clamp for moulds, surcharge base plate, surcharge weight for 3000 and 15000 cm3, handle for base ..
For determining the hardness number of Mastic Asphalt for flooring. It consist of an internally insulated cabinet to the base of which is fitted a water bath having two taps. The bath is heated by an immersion heater and the temperature is controlled with the thermostat at 35° +/- 0.5°..
ASTM: D 1559 T- 62. BS 598-107 The Apparatus consists of : A loading unit motorized, capacity 5000kgf with two telescopic pillars and an adjustable cross head. Limit switches are fitted inside to control upward or downward movement of the pillars. On off reversing switch and indicator lamps are o..
IS : 2386 (Part-IV) ASTM : C131 The Los Angeles Abrasion Machine is used for the determination aggregates resistance to fragmentation. The machine consists of a rolled steel drum having inside diameter of 711 mm and internal length 508 mm, and rotated at a speed range of 31 and 33 r.p.m. and an elec..
IS 3766-1977, IS 1598-1977 BS 131 PART-I - IV The machine consist of a pendulam with hammer having a striker at the end.The machine has two capacity ranges 170 Jules for Izod test and 300 Jules for Charpy test .Two control leavers are fitted in this machine ,one for releasing the pendulam a..
The Flow Table consists of a brass table top 250 ± 2.5 mm dia mounted on a rigid stand. The table top is re-inforced with equally disposed ribs and allowed to drop through 12 mm by a ground and hardened cam. Complete with mould 100 mm base dia. 70 mm top dia, 50 mm high.